User's Manual

7
Swipe down from the top edge of the screen
to open the settings menu. Click the following
mode icon to switch the pan/tilt follow mode
or lock mode.
● PTZ following mode and corresponding icon:
Following mode (default mode): This mode
is suitable for most shooting scenes. The
camera lens roll is kept horizontal, and
pitch/pan will follow the handle rotation.
Pitch lock mode: Roll and pitch axes of the
camera lens remain locked, only pan will
follow the rotation of the handle.
The above two following modes support face follow (UI).
● MOIN Camera will automatically follow the user after
recognizing the face in selfie mode.
● When the camera is facing forward, you need to click the
confirm (UI) to start following (with the above UI picture)
FPV mode: the camera lens completely follows
all directions of the gimbal, pitch, roll, and pan
will follow the rotation of the handle.
Return to the center: after returning to the
center, the lens will face straight ahead
horizontally.
To return the camera to center. You can
double-click the power button or slide down
from the top edge of the screen and click the icon
to the enter the settings menu.
 6:@LURRU]YKTYOZO\OZ_YKZZOTM
Attention:
When the movement of the gimbal is blocked, it will
enter the protection mode. After entering the protection
mode, please ensure that the movement of the gimbal is
not blocked, and click the screen to unlock (UI image) to
wake up the gimbal.
Swipe down from the top edge of the screen , click the setting
menu to enter the system setting menu, and click "PTZ sensitivity".
The pan/tilt sensitivity can be set to: sensitive or soft.
Set to sensitive, the gimbal will respond quicker; set to soft, the
gimbal will respond slower and smoother.
9]OZIN-OSHGRZU,URRU]3UJK