User guide

www.moxi.com Moxi HD DVR

1. Attach the coax cable coming from your wall to the single input on a splitter. (We recommend

using a splitter to maintain your signal strength.)

2. Attach two coax cables to the two connectors on the splitter.

3. Attach one of the coax cables coming from the splitter to the SDV Tuning Adapter.

4. Attach the other coax cable coming from the splitter to the cable-in port on the Moxi HD DVR.

5. Connect the USB cable between the SDV Tuning Adapter and the Moxi HD DVR (use the front or

rear USB port.)

6. Plug-in the SDV Tuning Adapter power cord. The Tuning Adapter is a hot pluggable device;

therefore, no restart of the HD DVR is required. Any SDV channels you subscribe to will be listed

in Channel List and will be viewable.

Return to the start of the document

I have a SDV Tuning Adapter attached to my Moxi HD DVR. I removed my

CableCARD. Do I have to do a channel scan?

A channel scan is not necessary when a CableCARD is removed as long as the SDV Tuning

Adapter is still connected to the Moxi HD DVR. However, without the CableCARD, you will not

have access to any premium channels to which you may subscribe.

Video & Audio

How do I decide which type of video and audio connection I should use between

the Moxi system and my TV and audio receiver?

Select the highest quality video and audio connection that your TV and optional audio receiver

allow. The list below shows the preferred connection first, and the remaining connections in

descending order. Note that S-Video and S/PDIF optical cables are not supplied with the Moxi

system.

Video Output

Options

Audio Output Options

HDMI

None required

Component

S/PDIF (optical digital audio); RCA coax (electrical digital

audio) Red/white RCA (analog audio)

S-Video

S/PDIF (optical digital audio); RCA coax (electrical digital

audio) Red/white RCA (analog audio)

Composite

S/PDIF (optical digital audio); RCA coax (electrical digital

audio) Red/white RCA (analog audio)