User guide

www.moxi.com Moxi HD DVR

Return to the start of the document

What will happen if I interrupt a channel scan?

Do not interrupt the scan. If the scan is not successfully completed, it may not be possible to

watch or record shows until a scan is manually started and successfully completed.

Can a channel scan be started manually?

Channel scan can be selected manually through Settings/Channel List/Channel Scan.

The scanned channels do not have program guide data. How do I fix that?

After a channel scan, in the Moxi Menu, navigate to Settings, select Channel List and then

Channel Mapping. A vertical list displays all tunable channels that were not associated

(mapped) with an EPG channel at the time of your channel scan. (The gold diamond indicates the

channels are ―un-mapped.‖ After they are mapped, the channel logo appears instead.)

1. Use the up/down arrows to navigate a channel in the left list into center focus. To see

the program currently showing on this channel, press OK and choose watch. Notice that

a new list of channels appears on the right. This is a list of EPG channels that are

available to map to the channel in the left list.

2. Press the right arrow to access the available, unassociated EPG channels list, and then

use the up/down arrows to review the list. As you scroll through the right list, a

description of the program ―Now airing‖ displays.

3. Use the ―Now airing‖ information or the information you gained by watching the channel

to decide whether the programming of an EPG channel matches the channel in the left

list. When you find a match, press OK on the EPG channel name in the right list.

You will see a note asking ―Are you sure you would like to map program information from

channel <the channel in the right list> to channel <the channel in the left list?>. If you

respond yes, the channel in the left list displays as a mapped channel, and will have the

logo of the EPG channel you selected in the right list.

4. If you determine that you mapped an EPG channel to a tunable channel in error, navigate

to the mapped channel in the left list, press OK, and respond to the confirmation, ―Are

you sure you would like to un-map program information from channel <the mapped

channel in the left list>? Follow procedures in steps 1-3 above to map the channel

correctly.

Section 3: Moxi Menu Questions

DVR

Moxi Menu Settings

Schedule Recordings Remotely

Using Media Link

Using MoxiNet

Using Photos

Using Jukebox