User guide
www.moxi.com Moxi HD DVR
© ARRIS Group, Inc. 2009. All rights reserved. Page 11 of 27 Moxi HD DVR
Return to the start of the document
How does Moxi know what my channel lineup should be?
In your Moxi account, your zip code and cable provider determine your channel lineup options, so
ensure those are correct for the device you are registering. In order to identify your lineup, select
to view the channel list, being careful to look at the channels into the 100s to be sure they match
what you are used to.
I was instructed to restart the Moxi system. How do I do that?
Press and hold the Reset button on the front panel for four seconds. You may also unplug the
power cord.
Remote Control
Can the Moxi remote be used to control other components such as my TV and
audio receiver?
Yes. If just the TV is programmed, the remote will control the TV power, and TV volume/mute.
When an audio device is also programmed, the volume/mute buttons control the audio device.
How do I program the Moxi remote to control the TV and audio device?
Your Moxi remote can be programmed to control both TV and audio devices using the instructions
and programming codes provided in the Remote Control Guide at
moxi.com/support/documentation. You can reset the Moxi remote to the factory default by
selecting the following buttons: Moxi, OK, clear, clear, clear.
Are there any shortcut buttons on the remote?
The User Guide includes many tips to move quickly through the Moxi Menu using the remote.
Here are a few:
Press the play button with a current program in center focus (all filters and Grid Guide) to tune
directly to the channel.
Press the lens button once to go to Recorded TV. Press it twice to open the Grid Guide (if
enabled).
Press the clear button to dismiss the flip bar, transport bar, and to clear text entered in the
search tool.
Press the Moxi button to access the top of the menu structure.
In Media Link, press the right arrow to drill down into a folder; press the left arrow to return to
the previous location.
Which remote buttons allow me to move ahead and back in a show?
Use the following Moxi remote buttons to navigate through recorded TV shows:
rew rewinds back through a program (at up to three speeds)
fwd fast-forwards through a program (at up to three speeds)
replay goes back 7 seconds
back goes back 15 minutes
skip jumps ahead in increments determined by you in Settings
next jumps ahead 15 minutes
pause plus fwd moves forward in slow motion