User guide

RE S ET ME N U
OK
Infrared Emitter
Subchannel Separators
Many networks broadcast multiple digital subchannels. For example, some networks broadcast four standard
definition subchannels identified using a decimal point (such as 09, 09.1, 09.2, and 09.3). When using the arrow
buttons to navigate the electronic program guide, these channels appear in order in the channels listing. To button-
press directly to these subchannels, use the jump button (which also has a dot) on the number pad to represent
the decimal point. For example, to go directly to channel 09.2, on the remote control number pad press 0, 9, jump,
and then 2.
Infrared Receiver
When a button on the Moxi remote is pressed, the infrared signal is sent to an IR receiver. The receiver then sends
commands to electronic components.
For the IR receiver to send its signals to the Moxi system, it must have a clear view of the front panel of the Moxi
system (see the following figure).
87