Users Manual

NPort W2150A/W2250A Series Web Console: System Management
9-8
E-mail Alert
The E-mail Alert page is located under Auto Warning Settings in the System Management folder. This
is where you specify how and where e-mail is sent when e-mail is used for automatic notification of system
and serial port events.
ATTENTION
Consult your network administrator or ISP for the mail server settings to use for your network. If these
settings are not configured correctly, e-mail notification may not work properly.
Mail Server (SMTP)
Default
Options free text (e.g., “192.168.3.3”)
Description This field specifies the IP address of the mail server that will be used when sending
automatic warning e-mails. If the mail server requires authentication, select My server
requires authentication and enter the username and password.
From e-mail address
Default
Options free text (e.g., “[e-mail]”)
Description This field specifies the e-mail address that will be listed in the e-mail’s From field.
To e-mail address 1 to 4
Default
Options free text (e.g., “[e-mail]”)
Description These fields specify the destination e-mail address(es) for the automatic e-mail warnings.