Users Manual

A
A. SNMP Agents with MIB II & RS-232-Like
Groups
The NPort has built-in SNMP (Simple Network Management Protocol) agent software that supports SNMP
Trap, RFC1317 RS-232 like groups and RFC 1213 MIB-II. The following table lists the standard MIB-II
groups, as well as the variable implementation for the NPort.
RFC1213 MIB-II Supported SNMP Variables
System MIB
SysDescr SysContact SysServices
SysObjectID SysName
SysUpTime SysLocation
Interfaces MIB
itNumber ifOperStatus ifOutOctets
ifIndex ifLastChange ifOutUcastPkts
ifDescr ifInOctets ifOutNUcastPkts
ifType ifInUcastPkts ifOutDiscards
ifMtu ifInNUcastPkts ifOutErrors
ifSpeed ifInDiscards ifOutQLen
ifPhysAddress ifInErrors ifSpecific
ifAdminStatus ifInUnknownProtos
IP MIB
ipForwarding ipOutDiscards ipAdEntIfIndex
ipDefaultTTL ipOutNoRoutes ipAdEntNetMask
ipInreceives ipReasmTimeout ipAdEntBcastAddr
ipInHdrErrors ipReasmReqds ipAdEntReasmMaxSize
ipInAddrErrors ipReasmOKs IpNetToMediaIfIndex
ipForwDatagrams ipReasmFails IpNetToMediaPhysAddress
ipInUnknownProtos ipFragOKs IpNetToMediaNetAddress
ipInDiscards ipFragFails IpNetToMediaType
ipInDelivers ipFragCreates IpRoutingDiscards
ipOutRequests ipAdEntAddr