User's Manual

NPort W2150A/W2250A Series Web Console: Serial Port Settings
8-3
Operation Mode
Default Real COM
Options Real COM, RFC2217, TCP Server, TCP Client, UDP, Pair_Master, Pair_Slave, EModem
Description Along with Application, this field specifies the serial port’s operation mode, or how it will
interact with network devices. Depending on how Application is configured, different
options are available for Mode. Depending on how Mode is configured, additional settings
will be available for configuration. For an introduction to the different operation modes,
please refer to Chapter 4. Real COM: This serial port will operate in Real COM mode.
RFC2217: This serial port will operate in RFC2217 mode.
TCP Server: This serial port will operate in TCP Server mode.
TCP Client: This serial port will operate in TCP Client mode.
UDP: This serial port will operate in UDP mode.
Pair_Master: This serial port will operate in Pair Connection Master mode.
Pair_Slave: This serial port will operate in Pair Connection Slave mode.
EModem: This serial port will operate in Ethernet Modem mode.