User's Manual

NPort W2150A/W2250A Series Web Console: Network Settings
7-6
WLAN Settings
WLAN
The WLAN page is located under WLAN Settings in the Network Settings folder. You can modify IP
configuration, IP address, Netmask, and Gateway for your WLAN.
The NPort W2150A/W2250A Series supports IEEE 802.11a/b/g/n wireless network interfaces. The supported
IP configurations are static and dynamic (BOOTP, DHCP, or BOOTP+DHCP). Users can set up the IP
configuration with the serial console, or the Web/Telnet consoles through the NPort’s Ethernet interface. For
detailed information about configuring IP configuration, IP address, Netmask, and Gateway, see the
previous section, Ethernet Configuration.
IP Configuration
Default Static
Options Static, DHCP, DHCP/BOOTP, BOOTP
Description This field determines how the NPort’s IP address will be assigned.
Static: IP address, netmask, and gateway are user-defined.
DHCP: IP address, netmask, gateway, DNS, and time server are assigned by the DHCP
server.
DHCP/BOOTP: IP address, netmask, gateway, DNS, and time server are assigned by the
DHCP server. An IP address is assigned by the BOOTP server if the DHCP server does not
respond.
BOOTP: An IP address is assigned by the BOOTP server.
IP Address
Default 192.168.127.254
Options IP address (e.g., “192.168.1.1”)