User's Manual

MiiNePort W1 Series Introduction
21-
Overview
The MiiNePort W1 series is a very compact module that installs in a serial device to connect it to a wireless LAN.
With such a small size, around half the size of a credit card., it can be installed into almost any kind of serial
device. The MiiNePort W1 series also comes with a built-in TCP/IP stack for fast integration with your serial
devices. This means that your engineers can spend less time with the TCP/IP and wireless details, and more
time on developing major features, shortening your product’s time to market. The reliable TCP/IP
communication firmware can be configured easily using a Windows utility, a web browser, or Telnet console.
An integration kit and a complete development kit are both available for evaluation and development use. The
development kit contains a development board, documents, sample code, cables, and accessories.
Product Features
The MiiNePort W1 series has the following features:
• 802.11 b/g compatible
• AES, WEP 64/128-bit, WPA, WPA2, PSK, 802.11i security support
• 1 Serial port, up to 921.6k bps
• 1 Ethernet port, 10/100Mbps
• SSL/SSH support for configuration
• Fast roaming to enhance connection reliability
Product Specifications
Form Factor
Type:
Drop-in module
Dimensions:
44.4 x 44.4 mm (1.75 x 1.75 in)
System
Information
Ethernet Interface
Number of Ports:
1
Speed:
10/100 Mbps, auto MDI/MDIX
WLAN Interface
Standard Compliance:
IEEE 802.11b/g
Network Modes:
Infrastructure mode (b/g), Ad-Hoc mode (b/g)
Spread Spectrum Technology:
DSSS, CCK, OFDM
Transmit Power:
IEEE 802.11b: 16 dBm (typical)
IEEE 802.11g: 14 dBm (typical)
Receive Sensitivity:
-71 dBm (Min)
Transmission Rate:
IEEE 802.11b: 11 Mbps
IEEE 802.11g: 54 Mbps
Transmission Distance:
Up to 100 meters (in open areas)
Wireless
Security:
AES, WEP 64/128
-bit, WPA, WPA2, PSK, 802.11i
Serial Interface
Number of Ports:
1
Serial Standards:
TTL
Serial Communication Parameters
Data Bits:
7, 8