User`s manual

VPort CGI Commands VPort Set/Get Configuration CGI URL and Parameter Items
2-28
Get Snapshot CGI URL
The Get Snapshot CGI is used to get a JPEG snapshot from a Moxa VPort.
getsnapshot.cgi
Example:
http://192.168.127.100/moxa-cgi/getsnapshot.cgi?chindex=2
Item Value Description
chindex 1 to 4 Specify channel index. Default value is
1, if omit this item.
Remove PTZ Driver CGI URL
The Remove PTZ driver CGI is used to remove the customer uploaded PTZ driver.
removeptzdriver.cgi
Example:
http://192.168.127.100/moxa-cgi/removeptzdriver.cgi?index=6&channel=1
Item Value Description
channel 1 to 4 Specifies the channel index; the default
value is 1, if this item is omitted.
index 1 to 10 Specifies which camera driver is to be
removed.
Device Reboot CGI URL
The Reboot CGI is used to reboot the Moxa VPort.
reboot.cgi
Example:
http://192.168.127.100/moxa-cgi/reboot.cgi
Get I/O Status CGI URL
This CGI command is used to get the LED status and information about devices.
getiostatus.cgi
Example:
http://192.168.127.100/moxa-cgi/getiostatus.cgi
VPort Reply Parameters:
Information Item Value Description
SYS 1: Red
2: Green
Status of STAT LED in device
PWR 0: no power input
1: power input
PWR1: power 1
PWR2: power 2
*depend on number of power inputs on
VPort
FAULT 0: OFF
1: ON
Status of Fault LED
PTZ 0: No data transmit