User`s manual

Moxa VPort 26 Introduction

1-5

• Minimum illumination up to 0.01 lux at F=1.2 (AGC 30db and sense-up off)

• Image mirror and inverse

• 350° pan, 85° tilt and 360° rotate camera head angles for different installation positions.

• Support up to 8 privacy mask areas and 4X digital zoom

• Excellent Video/Audio streaming and network transmission performance

• Maximum 3 simultaneous video streams for H.264 and MJPEG codecs

• Video stream up to 30 frames/sec at SVGA (800 x 600) resolution (in single stream)

• DynaStream™ supported for optimal network efficiency

• Video latency under 200 ms

• 1 audio input and 1 audio output supported for video/audio complete surveillance solution

• SVGA/Full D1/ 4CIF/ VGA/ CIF/ QCIF resolution

• TCP, UDP and HTTP network transmission mode

• Supports RTSP Streaming

• Supports IGMP (ver.3) protocols for efficient network transmission

• Supports SNMP (V1/V2C/V3) for network system integration and management

• Supports QoS (ToS) for transmission priority

• Adjustable frame rate and bit rate control

• User-friendly IP filtering

• Supports IEEE802.1X for network access authentications

• Supports HTTPS and SSH for network transmission security

• UPnP Supported

• Maximum 8 unicast video streams, and 50 multicast clients

• Support multicast push for all multicast clients

• OnVIF standard support for compatibility with other IP video products

• Modbus/TCP supported for direct communication with SCADA system

• Rugged Design for Mission-critical Industrial Environments

• IP 66 form factor protection for rain and dust

• Model available with PoE (802.3af) or 12/24 VDC and 24 VAC power input, with LED indicators

• Panel mounting for ceiling, or outdoor installation kit for versatile installation method

• -40 to 50°C operating temperature for critical industrial environment

• No heater and fan for long MTBF

• Vandal-resistant with EN62262, IK10

• CE, FCC, UL60950-1

• 3-year product warranty

• Built-in Video Motion Detection (VMD)

• 1 DI and 1 Relay output (DO) for sensors and alarms

• Video loss and power failure alarm

• Pre, Trigger and post snapshot images supported

• Sequential pre-event snapshot images

• Sequential snapshot images supported

• Support SDHC slot for local storage with SD card in event recording

• Support SMTP and FTP for alarm message transmission

• Support HTTP Event Server

• Support for Moxa SoftNVR-IA IP surveillance software, a video recording and management solution

• Free MOXA VPort SDK Plus with CGI Commands, ActiveX Control and API support for third-party developers