User`s manual

Moxa VPort 26 System Configuration
4-38
NOTE
Once the Show alert on the image when VMD is triggered is enabled, the red frames that appear on the
homepage image indicate the size of the VMD
window set up by the administrator.
Setup a VMD Alarm
Setting Description Default
Enable Enable or disable the VMD1, 2, and 3 Disabled
Window The name of each VMD window Blank
Percent The minimum percentage of an image change for triggering
VMD. Decrease the percentage to make it easier to trigger
VMD.
80
Sensitive The measurable difference between two
sequential images for
triggering VMD. Increase the sensitivity to make it easier for
VMD to be triggered.
1
NOTE
After setting the VMD Alarm, cl
ick the Save button to save the changes
Trigger Conditions and Actions
For each VMD administrators can set triggers, such as “send snapshot image via E-mail”, “send snapshot image
via FTP”, “send Message via HTTP event servers”, “save snapshot on storage” and “record video on SD card”.
Setting Description Default
Trigger Relay1 alarm
Once the VMD is triggered, the Relay alarm will be activated
Disabled
Send snapshot image
via E-mail
Once this VMD is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic page to the E-mail
addresses, which are set in the Network/ SMTP Server
page.
Disabled
Send snapshot image
via FTP
Once this VMD is triggered, the VPort will send the snapshot
images set in the Event Alarm/Basic
page to the FTP server,
which are set in the Network/ FTP Server page.
Disabled
Send message via HTTP
Event Servers
Once this VMD is triggered, the VPort
will send the message set
in HTTP Action Setting to the HTTP event servers, which a
re
set in the Network/ HTTP Event Server page.
Disabled
Record video on SD
card for Sec
Once this VMD is triggered, then for a configured time period
VPort will record video to an (optional) SD card.
Disabled
HTTP Action Setting
Setting Description Default
Server 1, 2, 3, or 4 Select the HTTP event server for sending the HTTP action Disabled
Blank text box
For customizing the message to the HTTP event server.
Blank