User`s manual

Moxa VPort 26 System Configuration
4-29
WB control
The VPort 26 supports WB (White balance) control for tuning the image color based on the field-site
environment. To use this function, follow the steps below.
Step 1:
Point the camera at a white, lit object
Step 2:
Select ATW (Auto-tracking white balancing) to let the camera to adjust to the correct right white color. If the
color is not correct, please configure the ATW offset number from 1 to 9 to find the correct color.
Step 3:
Select AWB (Auto white balance) to adjust the color in the environment. If the color is not correct, please
configure the AWB offset number from 1 to 9 to find the correct color.
Saturation and Sharpness
Setting Description Default
Saturation Configure the saturation of image from 1 (low) to 9 (high) 5
Sharpness Configure the sharpness of image from 1 (low) to 9 (high) 5
Privacy mask
VPort 26 supports up to 8 privacy mask areas on image for privacy protection.
Setting Description Default
Open the privacy mask configuration webpage. There are total
8 privacy mask areas.
Select which mask areas to cover with a
privacy mask.