User`s manual

Moxa VPort 26 Accessing the VPort 26’s Web-based Manager
3-2
Functions Featured on the VPort’s Web
Homepage
The homepage of the VPort’s web console shows information specific to that VPort, the camera image, and
configurations for the client and server.
NOTE
The VPort’s web homepage is best viewed in 1280 x 1024 screen resolution. This is because the camera image
can be viewed at a resolution up to Full D1 (NTSC: 720 x 480; 720 x 576). We strongly recommend using IE 6.0
(Microsoft Internet Explorer) or above to avoid incompatibility with the ActiveX Plug
-in.
VPort’s Information
This section shows the VPort’s model name, server name, IP address, MAC address and firmware version.
IP Camera Name
A server name can be assigned to each server. Administrators can change the name in System
Configuration/System/General. The maximum length of the sever name is 40 bytes.
Camera Image View
The assigned image description and system date/time will be displayed in the caption above the image window.
You may disable the caption or change the location of the image information in System
Configuration/Video/Image Setting. Note that if the VPort’s motion detection function is active, some
windows in the video picture might be framed in red.
Audio Control
The VPort 26 provides both audio input and audio output for voice over IP communication. Client users can
directly enable and disable the audio input (a microphone, for example) by checking the box of Enable Audio
Post on the VPort’s web homepage. You may also use the Client Setting to disable the audio transmission.