User`s manual

Moxa VPort 26 Getting Started
2-10
NOTE
For Windows XP SP2 systems or later, the ActiveX Control component will be blocked for system security
reasons. In this case, the VPort’s security warning message window may not appear. Users should access the
operating system control panel to unblock ActiveX controls or disable the security configuration to enable the
installation of the VPort’s ActiveX Control component.
Step 4: Access the VPort 26’s web-based manager.
After installing the ActiveX Control component, enter the IP address of the VPort device to access its web-based
controls; they should immediately appear. Check the following items to make sure the system was installed
properly:
1. Video Images
2. Audio Sound (make sure your PC’s or notebook’s sound is turned on)
3. Video Information
Step 5: Access the VPort system configuration.
Click on System Configuration to display a system overview. The Model Name, Server Name, IP Address,
MAC Address and Firmware Version will appear in the green bar at the top of the page. Use this information
to review the installation details.
For details about configuration settings, check the User’s Manual on the software CD.