User`s manual

Moxa VPort 26 Introduction
1-8
Pan, Rotation and Tilt Adjustment
Use the pan, rotation and tilt fasteners for panning, rotating and tilting the lens angles. To do this, the screws
must be loosened in advance. After the lens angles are correct, tighten the screws to fix the angles.
Light Sensor
The VPort 26 includes a light sensor for detecting illumination, which is for enabling the ICR (IR-cut filter
removable) function. When the illumination is under 3 lux, the image will be switched to night mode in black
and white, and when the illumination is greater than 5 lux, the image will be switched back to day mode in
color.
2-pin Terminal Blocks for Power Input
VPort 26 series has comes in two models: the VPort 26 is powered with 12/24VDC or 24VAC,
and the VPort P26 is power with PoE (Power over Ethernet, 802.3af). This 2 pin terminal block
is for the direct
-wired power input of the VPort 26.
NOTE
The specifications of the direct
-wire power input are 12-32 VDC for 12/24 VDC power input, or 18-
30 VAC for
24 VAC power input. The maximum power consumption is 11.7 Watt.
9-pin Terminal Block Connector for DI, DO, and Audio
The VPort 26 supports 1 DI (digital input), 1 DO (relay output), 1 audio input (line-in or mic-in), and 1 audio
output (line-out) through the 9-pin terminal block.
DO
(Relay Output)
NO (Normal Open)
Max. 1A, 24 VDC
Initial status is Normal Open
C (Common)
NC (Normal Close)
DI (Digital Input)
+
High: +13V to +30V
Low: -30V to +3V
-