User`s manual

VPort 251 User’s Manual System Configuration
NOTE
Note that if the Sender’s email address is not set, a warning message will pop up and the e-mail
system will not be allowed to operate.
NOTE
The 2nd SMTP Server and Sender Email are backups that are used if the 1st SMTP Server and
Sender Email fail when connecting or sending email.
Two recipient email accounts are available for receiving emails sent by the VPort. For redundancy,
both addresses receive the sent messages and alarm snapshots simultaneously.
Setting Description Default
1st Recipient’s Email
Address
Email address of the 1
st
recipient.
N
one
2nd Recipient’s Email
Address
Email address of the 2
nd
recipient.
N
one
FTP Server Settings
FTP is the other method available for the VPort to send alarm messages and snapshots.
1st FTP Server
Setting Description Default
1st FTP server FTP server’s IP address or URL address.
N
one
1st FTP server port
N
one
1st FTP user name
FTP server’s authentication.
N
one
1st FTP remote folder
FTP file storage folder on the remote FTP
server.
N
one
1st FTP passive mode
Passive transfer solution for FTP
transmission through a firewall.
Disabled
4-13