User`s manual

VPort 25 User’s Manual Introduction
1-9
SW-5: MIRROR (Mirror Function)
When the Mirror function is activated, the image will appear as if you are viewing it through a
rearview mirror.
ON: Activate the Mirror function
OFF: Disable the function (Default)
SW-6: GAMMA (Gamma Correction)
ON: 1.0
OFF: 0.45 (Default)
Pan Rotation Plate and Tilt Adjustment
Use the Pan Rotation Plate and Tilt Adjustment for panning and tilting the lens angles. To do this,
the screws must be loosened in advance. After the lens angles are correct, tighten the screws to fix
the angles
Open Case Sensor
The VPort 25 provides an open case sensor alarm for preventing the upper case from being opened
without authorization. Users can enable/ disable the alarm with the web-based manager.
2-pin Terminal Blocks for Power Input
In addition to PoE (power-over-Ethernet), the VPort 25 series also supports 12/24 VDC and 24
VAC power inputs with the 2-pin terminal block connector.
NOTE
The specifications of the direct-wire power input are 12-32 VDC for 12/24 VDC power input, or
18-30 VAC for 24 VAC power input.
NOTE
The VPort 25 supports standard IEEE 802.3af Power-over-Ethernet (PoE), with input voltage of
48 VDC (ranges from 44 to 48.5 VDC) and maximum input power of 15.4 W.
9-pin Terminal Block Connector for DI, DO, and Audio
The VPort 25 supports 1 DI (digital input), 1 DO (relay output), 1 audio input (microphone), and 1
audio output (speaker) through the terminal block.