User`s manual

Moxa VPort 16-M12 Accessing the VPort 16-M12’s Web-based Manager
3-2
Functions Featured on the VPort’s Web
Homepage
The homepage of the VPort’s web console shows information specific to that VPort, the camera image, and
configurations for the client and server.
NOTE
The VPort’s web homepage is best viewed in 1280 x 1024 screen resolution. This is because the camera image
can be viewed at a resolu
tion up to SVGA (800x600)
. We strongly recommend using IE 6.0 (Microsoft Internet
Explorer) or above to avoid incompatibility with the ActiveX Plug
-in.
VPort’s Information
This section shows the VPort’s model name, server name, IP address, MAC address, and the firmware version.
IP Camera Name
A server name can be assigned to each server. Administrators can change the name in System
Configuration/System/General. The maximum length of the sever name is 40 bytes.
Camera Image View
The assigned image description and system date/time will be displayed in the caption above the image window.
You may disable the caption or change the location of the image information in System
Configuration/Video/Image Setting. Note that if the VPort’s motion detection function is active, some
windows in the video picture might be framed in red.
Client Settings
Users can configure the following functions in Client Settings.
1. Encoder standard: Shows the encoding algorithm currently being used. VPort 16-M12 features built-in 2
encode engine to generate a maximum of three simultaneous video streams. Each client can select the
H.264 video streams from Stream 1, or the MJPEG/ H,264 video stream from Stream 2. To configure these
video streams, please go to:
System Configuration/Video/Video Performance.