User`s manual

Moxa VPort 16-M12 Getting Started
2-2
Before Getting Started
In what follows, “user” refers to those who can access the IP camera, and “administrator” refers to the person
who knows the root password that allows changes to the IP camera’s configuration, in addition to providing
general access. Administrators should read this part of the manual carefully, especially during installation.
First-Time Installation and Configuration
Hardware Installation
Step 1: Open and remove the upper case.
Use the security Torx to loosen the upper case screws.
Step 2: Use the installation template for drilling mount holes (gray marks are for a panel layout,
green marks are for a flush layout).
Step 3: Mount the VPort 16-M12 over the holes
Panel Mount
Fasten hex nuts, gaskets and washers, then
connect the M12 Ethernet cable.
Flush Mount
Insert the camera lens through the hole, leaving the
VPort 16-M12’s body concealed behind the mounting
surface.