User`s manual

Moxa VPort 16-M12 Introduction
1-7
Top View
• Base cover torx screw: To remove the top (base) cover, you can use the L type torx screw driver.
• Rotation plate: this plate can be turned manually to fix the horizontal position of the lens.
Side View
• Calibration for vertical tuning of the lens position (0 to 90
°): After vertically positioning the lens,
users can mark the position for future placements or mass installations.
• SD card cover: to utilize the SD slot for local storage, users must remove the slot cover with an L-type torx
screwdriver.
NOTE
The VPort 16
-
M12 supports a standard SDHC interface. Users can use SD cards suitable for this specification.
Transcend or Sandisk SD cards are recommended, particularly Sandisk Extreme III SD, because of their rapid
read/write speed.
NOTE
To check if the SD card has been successfully mounted, access the VPort’s web
-based manager and check
under system c
onfiguration-> Local storage.