User`s manual

Moxa VPort 16-M12 System Configuration
4-33
Video Loss
The Video Loss event means that the VPort cannot detect the camera module.
Video Loss Trigger Actions
Setting Description Default
Enable video loss alarm Enable or disable video loss alarm. Disable
Send snapshot image
via FTP
Once the Video Loss alarm is triggered, the VPort will send the
snapshot images set in the Event Alarm/Basic page to the
FTP server, which are set in the Network/ FTP Server
page.
Disable
Send message via HTTP
Event Servers
Once the Video Loss alarm is triggered, the VPort will send the
message set in the HTTP Action Setting to the HTTP event
servers, which are set in the Network/ HTTP Event Server
page.
Disable
Save snapshot on
storage
The pre-alarm, trigger, and post-
alarm snapshot images can be
saved on an (optional) SD card.
Disabled
Record video on SD
card sec
Once this VMD is triggered, then for a configured time period
the VPort will record video to an (optional) SD card.
Disabled
HTTP Action Setting
Setting Description Default
Server 1, 2, 3, 4 Select the HTTP event server for sending the HTTP action. Disable
Blank column Administrators can customize the message sent to the HTTP
event sever in this column.
Blank