Datasheet

3
www.moxa.com
[e-mail]
Railway Computers
Hardware Specifications
Computer
CPU: Intel XScale IXP435, 533 MHz
OS (pre-installed): Linux
DRAM: 512 MB DDR2 SDRAM onboard
Flash:
32 MB NOR Flash onboard to store OS
512 MB NAND Flash, up to 1 GB for OS file system, caching storage,
and data logger
USB: USB 2.0 hosts x 2
Storage
Storage Expansion: CompactFlash socket
Ethernet Interface
LAN: 2 auto-sensing 10/100 Mbps ports (M12)
Magnetic Isolation Protection: 1.5 KV built in
GPS Module (U-Blox LEA-6S)
Receiver Types:
• 50-channel U-blox 6 engine
• GPS L1 C/A code
• SBAS:WAAS, EGNOS, MSAS, GAGAN
Acquisition
• Cold starts: 28s
• Warm starts: 28s
• Aided starts: 1s
• Hot starts: 1s
Sensitivity
• Tracking: -160 dBm
• Reacquisition: -160 dBm
• Cold starts: -147 dBm
Timing accuracy
• RMS: 30 ns
• 99%: <60 ns
• Granularity: 21 ns
Accuracy
• Position: 2.5m CEP
• SBAS: 2.0m CEP
Protocols: NMEA, UBX binary, max. update rate: 5Hz (ROM version )
Time Pulse: 0.25Hz to 1KHz
Velocity Accuracy: 0.1 m/s
Heading Accuracy: 0.5 degrees
A-GPS: Supports AssistNow Online and AssistNow Offline, OMA SUPL
compliant
Operational Limits: Velocity:500m/s(972 knots)
Connector Type: TNC
WLAN Module (Atheros AR9220)
WAPN001: IEEE802.11a/b/g/n wireless LAN module with U.FL antenna
connector
Standards: IEEE802.11a/b/g/n for wireless LAN
Connector Type: QMA connector (female type) x 2
Mode: Client
Cellular Module (Cinterion PH8)
Frequency Bands: GSM/GPRS/EDGE/UMTS/HSPA+
Band Options:
• Five band UMTS(WCDMA/FDD)
• 800/850/1900 AWS and 2100 MHz
• Quad-band GSM: 850/900/1800/1900 MHz
HSDPA/HSUPA Data Rates:
DL: 3.6/7.2/14.4 Mbps; UL: 2.0/5.76 Mbps
UMTS Data Rates:
DL: max 384 Kbps; UL: max 384 Kbps
EDGE Class 12:
DL: max 237 Kbps; UL: max 237 Kbps
GPRS Class 12:
DL: max 85.6 Kbps; UL: max 85.6 Kbps
Connector Type: QMA connector (female type) x 1
Serial Interface
Serial Standards: 2 RS-232/422/485 ports, software-selectable (DB9)
Console Port: RS-232 (TxD, RxD, GND), 4-pin pin header output
(115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction
control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: 4, source type
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type: 10-pin screw terminal block (4 points, COM, GND)
Isolation: 2 KV optical isolation
Digital Output
Output Channels: 4, sink type
Output Current: Max. 200 mA per channel
On-state Voltage: 24 VDC nominal, open collector to 30 V
Connector Type: 10-pin screw terminal block (4 points, GND)
LEDs
System: Power, Ready, Storage, Programmable
LAN: 10M/Link x 2, 100M/Link x 2 (on connector)
Serial: TxD x 2, RxD x 2
Reset Button: Supports “Reset to Factory Default”
Physical Characteristics
Housing: SECC sheet metal (1 mm)
Weight: 1 kg
Dimensions: 200 x 57 x 120 mm (7.87 x 2.24 x 4.72 in)
Mounting: DIN rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -25 to 55°C (-13 to 131°F)
Wide Temp. Models: -25 to 70°C (-13 to 158°F)
Storage Temperature:
Standard Models: -25 to 75°C (-13 to 167°F)
Wide Temp. Models: -40 to 80°C (-40 to 176°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: IEC 61373 standard
Anti-shock: IEC 61373 standard
Power Requirements
Input Voltage: 24 VDC (9 to 48 V), M12 connector
Power Consumption: 20 W
• 833 mA @ 24 VDC
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 55022 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4,
FCC Part 15 Subpart B Class B