User Manual

- 4 -
LED Name
Color
Function
(RJ45
connector)
Yellow
Steady On
10 Mbps Ethernet link
Blinking
Data transmission in progress
Off
Ethernet is not connected.
Wireless
Signal
Strength
Green
Yellow
Red
The number of glowing LEDs indicates the
signal strength.
3 (Green + Yellow + Red): Excellent
2 (Yellow + Red): Good
1 (Red): Poor
Off
Wireless module is not detected.
USR
User-
defined
Green
This LED can be defined by users. For
details, refer to Hardware User’s Manual.
Programm
able
diagnostic
LEDs
Green
Yellow
Red
These three LEDs are programmable. For
details, refer to the “
Default Programmable
Button Operation" section in the Hardware
User’s Manual.
Specifications
Input Current
700 mA @ 12 VDC
Input Voltage
12 to 36 VDC (3-pin terminal block,
V+, V-, SG)
Power Consumption
6 W (without cellular module and
external USB device attached)
Operating Temperature
Without LTE Module preinstalled:
-40 to 85°C (-40 to 185°F)
With LTE Module preinstalled:
-40 to 70°C (-40 to 158°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
ATEX information
Certificate number: DEMKO 19 ATEX
2295X
Certification string: Ex nA IIC T4 Gc
Ambient Range: -40°C ≦ Tamb ≦
85°C (without LTE module
preinstalled)
Ambient Range: -40°C ≦ Tamb ≦
70°C (with LTE module preinstalled)
Rated Cable Temp ≧ 90°C
IECEx Certificate no.
IECEx UL 19.0107X
Address of
manufacturer
FI.4, No.135, Lane 235, Baoqiao Rd.
Xindian Dist., New Taipei City, Taiwan
Hazardous Location
EN 60079-0:2012+A11:2013/IEC