User Manual

- 9 -
Connecting to a CAN Device
The UC-5111 and UC-5112 are provided with 2 CAN ports, allowing
users to connect to a CAN device. The pin location and assignments are
shown in the following table:
PIN
Signal
1
CAN_H
2
CAN_L
3
CAN_GND
4
-
5
-
6
-
7
CAN_GND
8
-
Connecting the Cellular/Wi-Fi Module and
Antenna
The UC-5102 and UC-5112
computers come with one
Mini PCIe socket for
installing a cellular or Wi-Fi
module. Unfasten the two
screws on the right panel to
remove the cover and find
the location of the socket.
The cellular module package includes 1 cellular module, and 2 screws.
The cellular antennas should be purchased separately to fit your
installation requirements.