User Manual

- 11 -
Follow these steps to install a Wi-Fi module.
1. Set the antenna cables
aside for convenience of
installation and clear the
wireless module socket as
shown in the figure.
2. Insert the cellular module
into the socket and fasten
two screws (included in the
package) on to the top of the
module.
We recommended using a
tweezer when installing or
removing the module.
3. Connect the free ends of the
two antenna cables next to
the screws as shown in the
image.
4. Replace the cover and secure
it with two screws.
5. Connect the antenna
adapters to the connectors on
the front panel of the
computer.
6. Connect the Wi-Fi antennas
to the antenna adapters.