User Manual

- 10 -
Follow these steps to install the cellular module.
1. Set the antenna cables aside
for convenience of installation
and clear the wireless module
socket as shown in the figure.
2. Insert the cellular module
into the socket and fasten
two screws (included in the
package) on to the top of the
module.
We recommended using a
tweezer when installing or
removing the module.
3. Connect the free ends of the
two antenna cables next to
the screws as shown in the
image.
4. Replace the cover and secure
it using two screws.
5. Connect the cellular antennas
to the connectors.
Antenna connectors are
located on the front panel of
the computer.
The Wi-Fi module package includes 1 Wi-Fi module, and 2 screws. The
antenna adapters and Wi-Fi antennas should be purchased separately
to fit your installation requirements.