User Manual

- 8 -

Real-Time Clock

The real-time clock in the UC-3100 is powered by a lithium battery. We

strongly recommend that you do not replace the lithium battery without

the help of a Moxa support engineer. If you need to change the battery,

contact the Moxa RMA service team.

ATTENTION

There is

a risk of explosion if the battery is replaced with an

incorrect type of battery.

Accessing the UC-3100 Using a PC

You can use a PC to access the UC-3100 by one of the following methods:

A. Through the serial console port with the following settings:

Baudrate = 115200 bps, Parity = None, Data bits = 8,

Stop bits = 1, Flow Control = None

ATTENTION

Remember to choose the

“VT100” terminal type. Use the console

cable to connect a PC to the UC-3100's serial console port

B. Using SSH over the network. Refer to the following IP addresses and

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Password: moxa