User Manual

UC-2100 Series Hardware Connection Description
3-6
5.
Antenna connectors are located on the top panel of the computer.
Connect the cellular antennas to the connectors.
You will need the following to install a Wi-Fi module. The Wi-Fi module package consists of 1 Wi-Fi module and
2 screws. You must purchase the Wi-Fi antennas separately based on your installation requirements.
Follow these steps to install a Wi-Fi module.
1. Set the antenna cables aside and clear the wireless module socket as
shown in the figure for convenience of installation.
2. Insert the Wi-
Fi module into the socket and fasten the two screws (in the
package) on to the top of the module.
3. Connect the free ends of the two antenna cables next to the screws as
shown in the image.
4. Replace the cover and secure it with the three screws.
(We recommend using tweezers to install and remove the module.)
5. Connect the antenna adapters to the connectors on the top panel of the
computer.
6. Connect the Wi-Fi antennas to the antenna adapters.