User`s manual

2. Getting Started

This chapter explains the initial installation process for the TN-5500. There are three ways to access the

TN-5500’s configuration settings: the serial console, Telnet console, and web console. If you do not know the

TN-5500’s IP address, you can open the serial console by connecting the TN-5500 to a PC’s COM port with a

short serial cable. You can open the Telnet or web console over an Ethernet LAN or over the Internet.

The following topics are covered in this chapter:

 RS-232 Console Configuration (115200, None, 8, 1, VT100)

 Configuration by Telnet Console

 Configuration by Web Browser

 Disabling Telnet and

Browser Access