User`s manual

TN-5516/5518 Series Featured Functions
3-53
NOTE If a router or layer 3 switches is connected to the network, it will act as the Querier; thus, this Querier option
will be disabled on all Moxa layer 2 switches.
If all switches on the network are Moxa layer 2 switches, then only one layer 2 switch will act as Querier.
IGMP Table
The TN-5500 displays the current active IGMP groups that were detected.
The information includes VID, Auto-learned Multicast Router Port, Static Multicast Router Port,
Querier Connected Port, and the IP and MAC addresses of active IGMP groups.
Add Static Multicast MAC
If required, the TN-5500 also supports adding multicast groups manually.
Add New Static Multicast Address to the List
Setting Description Factory Default
MAC Address Input the multicast MAC address of this host. None
MAC Address
Setting Description Factory Default
Integer Input the number of the VLAN that the host with this MAC
address belongs to.
None
Join Port
Setting Description Factory Default
Select/Deselect Checkmark the appropriate check boxes to select the join ports
for this multicast group.
None