User`s manual

TN-5516/5518 Series Featured Functions
3-17
Available Ports/Member Ports
Setting Description Factory Default
Member/available ports This lists the ports in the current trunk group and the ports that
are available to be added.
N/A
Check box This selects the port to be added or removed from the group. Unchecked
Port This is how each port is identified. N/A
Port description This displays the media type for each port. N/A
Name This displays the specified name for each port. N/A
Speed This indicates the transmission speed for each port (100M-Full,
100M-Half, 10M-Full, or 10M-Half).
N/A
FDX flow control This indicates if the FDX flow control of this port is enabled or
disabled.
N/A
Up This is used to add selected ports into the trunk group from
available ports.
N/A
Down This is used to remove selected ports from the trunk group. N/A
Trunk Table
Setting Description
Trunk group Displays the trunk type and trunk group.
Member port Displays the member ports that belong to the trunk group.
Status Success means port trunking is working properly.
Fail means port trunking is not working properly.
Standby means port trunking is working as a standby port. When there are more
than eight ports trunked as a trunking group, the 9th port will be the standby port.