User`s manual

TN-5516/5518 Series Featured Functions
3-7
NOTE 1. The TN-5500 Series is equipped with a “Hardware-based IP configuration” feature through the 3 rotary
switches physically mounted on the product's front panel. Please reference the Hardware Installation
Guide for how to configure.
2. “Hardware-based IP configuration” is enabled only when the 3 rotary switches are set in valid values
ranging from 001 to 254. The TN-5500’s IP address will be configured as “192.168.127.XXX”, where
“XXX” is the valid value set on the 3 rotary switches.
3. If “Hardware-based IP configuration” is enabled, it
overrides the “Auto IP Configuration” described in this
section.
4. Disable “Hardware-based IP configuration” by setting the 3 rotary switches with value 000 (factory
default).
5. If the value of the 3 rotary switches is invalid (255 to 999), TN-5500 uses the fixed IP address
192.168.127.253 by default.
Switch IP Address
Setting Description Factory Default
IP address for the
TN-5500
This assigns the TN-5500’s IP address on a TCP/IP network. 192.168.127.253
Switch Subnet Mask
Setting Description Factory Default
Subnet mask for the
TN-5500
This identifies the type of network to which the TN-5500 is
connected (e.g., 255.255.0.0 for a Class B network, or
255.255.255.0 for a Class C network).
255.255.255.0
Default Gateway
Setting Description Factory Default
IP address for gateway This specifies the IP address of the router that connects the LAN
to an outside network.
None
DNS IP Address
Setting Description Factory Default
IP address for DNS
server
This specifies the IP address of the DNS server used by your
network. After specifying the DNS server’s IP address, you can
use the TN-5500’s URL (e.g., www.tn.company.com) to open
the web console instead of entering the IP address.
None
IP address for 2nd DNS
server
This specifies the IP address of the secondary DNS server used
by your network. The TN-5500 will use the secondary DNS
server if the first DNS server fails to connect.
None