User`s manual

C
C. Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004* for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s* for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2C/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP,
TFTP, SNTP, SMTP,
RARP, RMON, HTTP, HTTPS, Telent, SSH, Syslog, LLDP, IEEE 1588 PTP V2*, Modbus/TCP,
IPv6, NTP Server/Client*
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2,
3, 9
Flow Control: IEEE802.3x flow control, back pressure flow control
*Available in Q3, 2011
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
Fast Ethernet: Front cabling, M12 connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and
auto MDI/MDI-X connection
Gigabit Ethernet: Down cabling, M12 connectors, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex
mode, auto MDI/MDI-X connection, with or without bypass relay function
Console Port: M12 A-coding 5-pin male connector
System LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators: 10/100M (fast Ethernet port), 10/100/1000M (Gigabit Ethernet port)
Alarm Contact: 2 relay outputs in one M12 A-coding 5-pin male connector with current carrying capacity of 3
A @ 30 VDC
Rotary Switches: For setting the last 3 digits of the IP address
Power Requirements
Input Voltage:
• LV: 12/24/36/48 VDC (8.4 to 60 VDC)
• MV: 72/96/110 VDC (50.4 to 154 VDC)
• HV: 110/220 VDC/VAC (88 to 300 VDC, 85 to 264 VAC)