User`s manual

RNAS-1200 Series Vibration and Temperature Protections
9-3
ATTENTION
1. For a 500GB HDD, it will take about 5 minutes to complete the process to enable DataXPro vibration
protection.
2. The data on the disk volume will be formatted after configuring DataXPro. We strongly recommend
you
backup your data before configuring DataXPro.
High Temperature Protection
Select Enable to configure the temperature thresholds for protection against heat.
ATTENTION
Be aware that when the system reaches the configured heat threshold
all
drive activity will stop, and will not
recommence until
the total system temperature decreases to levels lower than the configured threshold.
During this time, no dat
a will be stored in the buffer and your NAS system will effectively shut down.