User`s manual

RNAS-1200 Series Modify Network Settings
6-14
Network Management
Item Name Item Description Value Description Rules for value
Ethernet1 (eth0)
networkResources.ip.1 IP of Ethernet 1. (IP Address)
networkResources.subnet.1 Netmask of
Ethernet 1
(Netmask)
networkResources.gateway.1 Gateway of
Ethernet 1.
(IP Address of
Gateway)
networkResources.defaultGateway.1 Set default
gateway for
Ethernet 1
0 : Disable
1 : Enable
networkResources.enableDHCP.1 Enable/disable
DHCP for Ethernet
1
0 : Disable
1 : Enable
Ethernet2 (eth1)
networkResources.ip.2 IP of Ethernet2. (IP Address)
networkResources.subnet.2 Netmask of
Ethernet2.
(Netmask)
networkResources.gateway.2 Gateway of
Ethernet2.
(IP Address of
Gateway)
networkResources.defaultGateway.2 Set Ethernet 2
default gateway
0 : Disable
1 : Enable
networkResources.enableDHCP.2 Enable/disable
DHCP for Ethernet
2.
0 : Disable
1 : Enable
IP Bonding1 (bond0)
networkResources.ip.3 IP of logical bond (IP Address)
networkResources.subnet.3 Netmask of logical
bond
(Netmask)
networkResources.gateway.3 Gateway fo
r logical
bond
(IP Address of
Gateway)
networkResources.defaultGateway.3 Set gateway of
logical bond
0 : Disable
1 : Enable
networkResources.enableDHCP.3 To enable/disable
DHCP for logical
bond
0 : Disable
1 : Enable
trunkResources.enableTrunking.1 To enable/disable
IP bonding
(trunking).
0 : Disable
1 : Enable
trunkResources.trunkingMode.1 Select the IP
bonding mode of
(trunking).
0 : Balance-RR
mode
1 : Active Backup
2 : Balance-XOR
3 : Broadcast
4 : IEEE 802.3ad
5 : Balance-TLB
6 : Balance-ALB
NOTE
I
f IP bonding is enabled, any network settings configured for Ethernet 1 and Ethernet 2 will have no effect.