User`s manual

RNAS-1200 Series Modify System Settings
5-3
General Settings
Click General Settings from the SYSTEM tab. Here you may configure the host name and the web server
listening port for the RNAS-1200. This is the web server that serves the RNAS web configuration interface.
Resetting this entry will result in a restart of the web interface, after which connection to the RNAS
configuration UI will be broken. To reconnect, you will need to use your HTML browser to log on to the
configuration interface over the port you have just configured (192.68.XX.XXX:YYY, where Y is the newly
configured port number and XX.XXX is the user-configured IP address). To set your changes, click Apply.
Reset to Default
In addition, you may reset the entire system configuration to default values by applying the Reset to Default
option. Select Keep Network Settings if you wish to reset the rest of the system but continue to use the
current network settings. You may also reset the system to factory defaults by using a screwdriver (or other
pointed tool) by push the Reset to Default button (on the rear panel of the RNAS-1200) and holding it for five
seconds.
Please note that all data will be erased after resetting to default.