User`s manual

PT-7828 User’s Manual Featured Functions
3-28
"Settings" Items
Redundancy Protocol
Setting Description Factory Default
Turbo Ring
This selects the Turbo Ring
protocol.
None
Turbo Ring V2
This selects the Turbo Ring V2
protocol.
RSTP (IEEE
802.1w/1D)
This selects the RSTP protocol.
None This disables ring redundancy.
Set as Master
Setting Description Factory Default
Enabled
The PT-7828 is manually selected
as the master.
Not checked
Disabled
The Turbo Ring or Turbo Ring V2
protocol will automatically select
the master.
Redundant Ports
Setting Description Factory Default
1st Port
This specifies which port on the
PT-7828 will be used as the first
redundant port.
None
2nd Port
This specifies which port on the
PT-7828 will be used as the second
redundant port.
None
Enable Ring Coupling
Setting Description Factory Default
Enable
This specifies that this PT-7828
will be a ring coupler.
Not checked
Disable
This specifies that this PT-7828 is
not a ring coupler.
Coupling Port
Setting Description Factory Default
Coupling Port
This specifies which port on the
PT-7828 will be used as the
coupling port.
None
Coupling Control Port
Setting Description Factory Default
Coupling Control Port
This specifies which port on the
PT-7828 will be used as the
coupling control port.
None