User`s manual

PT-7828 User’s Manual Featured Functions
3-92
NOTE
The following events will be recorded into the PT-7828’s Event Log table, and will then be sent
to the specified Syslog Server:
1. Cold start
2. Warm start
3. Configuration change activated
4. Power 1/2 transition (Off ( On), Power 1/2 transition (On ( Off)
5. Authentication fail
6. Topology changed
7. Master setting is mismatched
8. DI 1/2 transition (Off ( On), DI 1/2 transition (On ( Off)
9. Port traffic overload
10. dot1x Auth Fail
11. Port link off / on
Using HTTPS/SSL
To secure your HTTP access, the PT-7828 supports HTTPS/SSL to encrypt all HTTP traffic.
Perform the following steps to access the PT-7828’s web browser interface via HTTPS/SSL.
1. Open Internet Explorer and type https://PT-7828’s IP address in the address field. Press Enter
to establish the connection.
2. Warning messages will pop out to warn the user that the security certificate was issued by a
company they have not chosen to trust.
3. Select Yes to enter the PT-7828’s web browser interface and access the web browser interface
secured via HTTPS/SSL.