Installation guide

- 4 -
Gigabit/Fast Ethernet Interface
Modules (for slot 2)
40.7
86.6
PM-7200-2GTXSFP
40.7
86.6
PM-7200 1MSC/1SSC
40.7
86.6
PM-7200 1MST
PM-7200 2MSC/2SSC
40.7
86.6
PM-7200 2MST
40.7
86.6
Rack Mounting
Use four screws to attach the PT switch to a standard rack.
Use four screws to attach the PT switch to a
standard rack.
Wall Mounting
Use four screws to attach the PT switch to a Moxa wall mounting kit.
Wiring Requirements
WARNING Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your Moxa PowerTrans Switch.
Calculate the maximum possible current in each power wire and
common wire. Observe all electrical codes dictating the
maximum current allowable for each wire size.
If the current goes above the maximum ratings, the wiring could
overheat, causing serious damage to your equipment.
Grounding Moxa PowerTrans Switch
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screw to the grounding surface prior to connecting devices.