Datasheet

2
www.moxa.com
[e-mail]
Industry-specific Ethernet Switches
Dimensions
PT-510
Unit: mm (inch)
Front View Side View Back View
80 [3.15] 110 [4.33]
30.5 [1.2]
15.25 [0.6]
29 [1.14]
30.5 [1.2]
15.25 [0.6]
37 [1.46]21.5 [0.85]
29 [1.14]
114.5 [4.51]
72 [2.84]34 [1.34]
160 [6.3]
169.8 [6.69]
20 [0.79]
20 [0.79]
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1s for Multiple Spanning Tree Protocol
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, Modbus/TCP,
SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 1 Mbit
Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST/LC/MTRJ connector)
Console Port: RS-232 (RJ45)
LED Indicators: PWR1, PWR2 (DC models only), FAULT, MSTR/HEAD,
CPLR/TAIL
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
Power Requirements
Input Voltage:
•24VDC(18to36V)
•48VDC(36to72V)
•110/220VDC/VAC(88to300VDC,85to264VAC)
Input Current: (all ports are equipped with fiber)
•Max.0.425A@24VDC
•Max.0.19A@48VDC
•Max.0.105/0.053A@110/220VDC
•Max.0.086/0.044A@110/220VAC
Overload Current Protection: Present
Connection: 5-pin terminal blocks
Reverse Polarity Protection: Present
Physical Characteristics
Housing: IP40 protection
Dimensions: 80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)
Weight: 1210 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F), cold start
requires min. of 100 VAC at -40°C
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 508 (Pending)
EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
Power Automation: IEC 61850-3, IEEE 1613
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty