User Manual

- 12 -
Type
Color
State
Description
Fault
Red
On
Device is booting up, or IP address conflict.
Blinking
(slow at
1-sec
intervals)
Cannot get an IP address from the DHCP
server
Off
Power is off or no error condition exists.
2G / 3G
Amber
Blinking
(slow at
500-ms
intervals)
GSM/GPRS/EDGE is connected.
On
UMTS/HSPA is connected.
Off
GSM/GPRS/EDGE/UMTS/HSPA is
disconnected.
4G
Amber
On
LTE is connected
Off
LTE is disconnected.
SIM1
Amber
On/Off
SIM 1 is active or inactive
Blinking
SIM 1 is not inserted or PIN code is incorrect
SIM2
Amber
On/Off
SIM 2 is active or inactive
Blinking
SIM 2 is not inserted or PIN code is incorrect
GPS
Green
On
GPS signal has been located
Blinking
Locating GPS signal or
less than four satellites have been located.
Off
GPS signal has not been located
TX Rx
Amber
On
The serial port is transmitting data
Off
No data is being transmitted or received
through the serial port
Specifications
Cellular Specification
Standards
GSM/GPRS/EDGE/UMTS/HSPA/LTE
Band Options OnCell G3150A-LTE-EU:
• B1 (2100 MHz)/B3 (1800 MHz)/B7 (2600
MHz)/B8 (900 MHz)/B20 (800 MHz)
• UMTS/HSPA 2100/1900/850/800/900 MHz
OnCell G3150A-LTE-US:
• B2 (1900 MHz)/B4 (AWS)/B5 (850 MHz)/
B13 (700 MHz)/B17 (700 MHz)/B25 (1900
MHz)
• UMTS/HSPA 2100/1900/AWS/850/900 MHz
• Universal quad-band
GSM/GPRS/EDGE/1800/1900 MHz
LTE Data Rate Category 3
Downlink: 100 Mbps (20 MHz bandwidth), 50 Mbps
(10 MHz bandwidth)
Uplink: 50 Mbps (20 MHz bandwidth), 25 Mbps (10
MHz bandwidth)
HSPA Data Rate
Downlink: Up to 42 Mbps (category 24)
Uplink: Up to 5.76 Mbps (category 6)
GPRS Data Rate
Downlink/Uplink: 85.6 kbps DL, 42.8 kbps UL