User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

6
6
Chapter 6 Using the Web Console
The web console is the most user-friendly method available to configure the OnCell
G3111/G3151/G3211/G3251. With a standard web browser, you have easy and intuitive access to all
settings and options. In this chapter, we introduce the web console and go through the basic
configuration options. The same configuration options are also available through the Telnet and
serial console.
This chapter covers the following topics:
Using Your Web Browser
Browser Cookie Settings
Trusted Site Settings
Opening the Web Console
Web Console Navigation
Basic Settings
Server Settings
Time Settings
Network Settings
Basic Network Settings
DNS Settings
Advanced Network Settings
Auto IP Report Settings