User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

5
5
Chapter 5 Introducing OnCell Central and
Ethernet Operation Modes
In this chapter, we introduce OnCell Central Management Software for host and device sites in the
private IP domain. We also describe the Ethernet operation modes of the OnCell G3100. The OnCell
G3100 not only connects serial devices to cellular networks, but Ethernet devices as well. After
selecting the proper operation mode, please refer to Chapters 9, 10, 11, and 14 for detailed
information on configuration.
This chapter covers the following topics:
OnCell Central Management Software
OnCell Central Serial Device Connection
OnCell Central Ethernet Device Connection
Cellular-Enabling Ethernet Device