User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual Initial IP Address Configuration
3-6
6. Use the arrow keys to move the cursor to IP address. Use the DELETE, BACKSPACE, or
SPACE keys to erase the current IP address, and then type in the new IP address and press
ENTER. Note that if you are using a dynamic IP configuration (BOOTP, DHCP, etc.), you will
need to go to the IP configuration field and press ENTER to select the appropriate
configuration.
7. Press ESC twice to return to the previous page. Press Y to confirm.