User`s manual

Table Of Contents
OnCell G3111/G3151/G3211/G3251 Series User’s Manual Initial IP Address Configuration
3-4
ATTENTION
Figures in this section were taken from the OnCell G3111/G3151/G3211/G3251s Telnet console.
1. From the Windows desktop, select Start
Run, and then type the following content in the Run
window:
telnet 192.168.127.254
If your IP address is different from the default setting, use your IP address instead. Click OK.
2. The console terminal type selection is displayed as shown. Enter 1 for ansi/vt100, and then
press ENTER to continue.