User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual Software Installation/Configuration
13-19
7. Click Finish to complete the installation of OnCell Search Utility.
Configuring OnCell Search Utility
The Broadcast Search function is used to locate all OnCell G3111/G3151/G3211/G3251 servers that
are connected to the same LAN as your computer. After locating an OnCell
G3111/G3151/G3211/G3251, you will be able to change its IP address.
Since the Broadcast Search function searches by MAC address and not IP address, all OnCell
G3111/G3151/G3211/G3251 servers connected to the LAN will be located, regardless of whether or
not they are part of the same subnet as the host.