User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Address Configuration
- 4. Introducing Serial Port Operation Modes
- 5. Introducing OnCell Central and Ethernet Operation Modes
- 6. Using the Web Console
- 7. Cellular Network Settings
- 8. Configuring Serial Port Operation Modes
- 9. Configuring the Cellular-Enabling Ethernet Device
- 10. Configuring OnCell Central Management Software
- 11. Additional Serial Port Settings
- 12. System Management Settings
- 13. Software Installation/Configuration
- A. Pinouts and Cable Wiring
- B. RFC2217
- C. Dynamic Domain Name Server
- D. Well Known Port Numbers
- E. Auto IP Report Protocol
- F. GSM Alphabet
- G. Default Settings

OnCell G3111/G3151/G3211/G3251 Series User’s Manual System Management Settings
12-13
Configuration Import/Export
The OnCell G3111/G3151/G3211/G3251 can share or back up its configuration by exporting all
settings to a file.
To import a configuration, go to System Management
Maintenance Configuration Import.
Enter the configuration file path/name and click Submit. The OnCell
G3111/G3151/G3211/G3251’s configuration settings will be updated according to the configuration
file. If you also wish to import the IP configuration (i.e., the OnCell G3111/G3151/G3211/G3251’s
IP address, netmask, gateway, etc.), make sure that Import all configurations including IP
configurations is checked on.
To export a configuration, go to System Management
Maintenance Configuration Export
and click Download. A standard download window will appear, and you will be able to download
the configuration into a file name and location of your choice.