User`s manual

OnCell 5000 Series Configuring OnCell Central Management Software
7-10
Step 2: OnCell Device Web Console Settings
OnCell Central Settings
From the left navigation panel, click Network Settings Æ OnCell Central Settings Æ OnCell Central
Server to configure the OnCell Central Settings. The configuration items are shown below:
OnCell Central Server
Configuration
Server (default=Disable): If you select Enable, the OnCell will be ready to connect to the OnCell Central
Server
Server IP: Enter the IP address that will be assigned to your OnCell Central Server. The IP address must be in
the Public IP domain.
Auto reconnect period (default=10 s): This field specifies the idle time setting for auto-reconnect.
Control Port
Management information port (default=63201): This port is used to transfer status information of the
OnCell to the OnCell Central Server. The port number must match the OnCell Central Manager’s port number
configured in the OnCell Central Server. In order to prevent port conflicts with other applications, you can set
the management information port to another port if needed.
Management configuration port (default=63202): This port is used to transfer configurations from the
OnCell to the OnCell Central Server. The port number must match the OnCell Central Manager’s port number
configured in the OnCell Central Server. In order to prevent a port conflict with other applications, you can set
the management information port to another port if needed.
Telnet port (default=63203): The Telnet port is the TCP port that is listening for Telnet connection from the
host side. In order to prevent a TCP port conflict with other applications, you can set the Telnet port to another
port if needed.